Installation
9. Reattach the SW-1204 board to the CN chassis
assembly, then fix then with the two screws.
10. Solder the pins of the external connectors.
11. Reassemble the unit in the reverse order from steps 1
to 6.
2-20
2-2-11. SY-314 Board
Removing
1. Remove the base plate. (Refer to Section 1-3-4.)
2. Remove the three tapes A fixing the flexible flat cables
and harnesses.
3. Disconnect the flexible flat cables and harnesses from
the connectors (CN1001, CN1002, CN1501, CN1801,
CN1802, CN1803, CN1804, CN1805) on the SY-314
board.
4. Remove the four screws, and remove the SY-314
board.
SY-314 board
CN1803
CN1802
CN1801
CN1501
CN1804
CN1001
Tape A
CN1002
CN1805
PSW2.6 x 6
BRC-300/300P
BRU-300/300P
Tapes A