Sony DVS-9000 System User Manual page 507

Hide thumbs Also See for DVS-9000 System:

Table of Contents

Rings settings

You can set the degree of transition, the degree of randomness in the distance

moved by each block, the amount of movement, the width of the partitions, the

degree of randomness in partition width, the center point, the starting angle,

and other parameters.

To apply the Rings effect

With the Rings menu displayed, use the following procedure.

To make transition settings, press [Transition] and set the following

To set the partition method, press [Partition] and set the following

To set the ring center position, press [Position] and set the following

To partition into pixels, press [Pixel], turning it on, and set the following

Degree of transition

Degree of randomness in distance

moved by each block

Amount of movement toward

periphery accompanying transition

Width of partition

Degree of randomness in partition

Starting angle of effect

Horizontal center position

Vertical center position

Degree to which image disappears

around periphery

Degree of jaggies at block edges

Setting values

0.000 to 100.000

–1.000 to +1.000

Setting values

0.000 to 100.000

–8.000 to +8.000

Setting values

–5.000 to +5.000

–4.000 to +4.000

Setting values

0.00 to 100.00

DME Special Effect Operations

Dvs-9000sf system