Wipe Crop Settings - Sony DVS-9000 System User Manual

Hide thumbs Also See for DVS-9000 System:

Table of Contents

Press [Skew], turning it on, and use knob 1 to set the Skew H parameter so

that the parallel lines appear to emerge from the depth at the right.

Wipe Crop Settings

• The wipe crop function is not supported on the MVE-8000A.

• When wipe crop is on, any mask that was on is turned off.

• When brick is on, wipe crop cannot be turned on. To turn wipe crop on, it is

first necessary to turn brick off.

• In the <Shaped Video> group of the Video/Key menu, when [Output] is off,

unless you set [Bkgd] in the HF1 'Bkgd' menu to on, the wipe crop effect

will not function.

Applying the wipe crop effect

To select the pattern

In the DME menu, select VF1 'Edge' and HF6 'Wipe Crop.'

The Wipe Crop menu appears.

Press [Wipe Crop], turning it on.

Press [Pattern Select].

The Pattern Select menu appears.

From the displayed patterns (standard wipe patterns 1 to 24 and 304), press

any pattern to select it.

In this state, you can use the knobs to adjust the size of the pattern. (For

details of parameters, see the next item.)

To set the pattern size and position

In the Wipe Crop menu, press [Position/Size].

Set the following parameters.

The setting values of the parameters depend on the system aspect ratio (4:3

or 16:9), as follows.

DME Special Effect Operations

Dvs-9000sf system