Interfacing With External Devices (Device Interface Menu) - Sony DVS-9000 System User Manual

Hide thumbs Also See for DVS-9000 System:

Table of Contents

Interfacing With External Devices (Device

Interface Menu)

To carry out setup relating to DME connections with external devices, display

the DME >Device Interface menu.

To display the Device Interface menu

In the Engineering Setup menu, select VF4 'DME' and HF4 'Device

The following functions are available here.

• Editor Protocol: Set the protocol to be used on the Editor port.

• Editor Port Setting: Make settings relating to the control of the four editor

ports installed in the DME.

• GPI Input: Set the GPI input ports and trigger polarities, and make the

action settings.

• GPI Output: Set the GPI output ports and trigger polarities, and make the

action settings.

In the following, the settings for DME1 are explained. (It is not necessary to

make settings for DME2.)

Setting the editor protocol

In the <DME1 Editor Protocol> group of the DME >Device Interface menu,

press the following buttons to make the setting.

DME: Control by DME protocol through the editor port.

VTR: Control by VTR protocol through the editor port.

Making editor port settings

In the <DME1 Editor Port Setting> group of the DME >Device Interface menu,

press either of the following to select the way in which the editor ports are used.

Common: Control all of channels 1 to 4 through Editor ports 1 to 4.

Independ: Control channels 1 to 4 individually through Editor ports 1 to 4.

On the MVE-8000, the setting is fixed to Common.

Interfacing With External Devices (Device Interface Menu)

Dvs-9000sf system