Sony DVS-9000 System User Manual page 132

Hide thumbs Also See for DVS-9000 System:

Table of Contents

Setting the pattern limit by a menu operation

Executing a pattern limit transition

To cancel the pattern limit

To cancel the pattern limit after completion of step 3 in the previous procedure,

press the [PTN LIMIT] button, turning it off.

If after carrying out step 2 in the previous procedure, the pattern limit has been

reached, carry out the following procedure.

Executing a Transition

Press the [LIMIT SET] button.

This sets the current fader lever position as the pattern limit.

When a wipe is selected as the transition type, in the M/E or PGM/PST

menu, select first VF5 'Wipe,' then HF4 'Edge/Direction.'

When a DME wipe is selected as the transition type, in the M/E or PGM/

PST menu, select first VF6 'DME Wipe,' then HF4 'Edge/Direction.'

The Edge/Direction menu appears.

Press the [Pattern Limit] button, turning it on.

Turn the knobs to adjust the following parameters.

Pattern Limit

a) 0.00%: Executing the transition does not change the video output at all.

b) 100.00%: The transition is the same as when no pattern limit is set, but the cross-point

button selections of the background A and B buses do not interchange when the transition

Press the [PTN LIMIT] button, turning it on.

The button you pressed lights amber.

Carry out the transition.

The transition progresses as far as the set pattern limit. Even if the

transition completes, the cross-point button assignments of the background

A and B buses do not interchange.

Carry out the transition once again.

The status before the previous transition is restored.

Setting values

Pattern limit

Dvs-9000sf system