Sony DVS-9000 System User Manual page 898

Hide thumbs Also See for DVS-9000 System:

Table of Contents

Setting the action of the [SHIFT] button in the cross-point control

In the <Display Shift Mode> group of the Panel >Xpt Assign >Main, V/K Pair

Assign menu or Panel >Xpt Assign >Table Button Assign menu, select either

of the following.

Display: Functions as a shift button dedicated to the source name displays.

Shift All Bus: Functions as a shift button for all buses.

• It is not possible to make this setting separately for each of the M/E and

• "Shift All Bus" is only valid when the cross-point button shift operation (see

Setting the source signal name

Sequential names for multiple signals

When you specify a number at the end of a signal name, all of the signals in the

range selected by knobs 1 and 2 are automatically assigned names ending with

sequential numbers.

Example: To assign sequential names to source signal 2 through source signal

1. In step 2 above, set knob 1 to "2," and set knob 2 to "3."

2. Set the name of source signal 2 to "CAM2."

Cross-Point Settings (Xpt Assign Menu)

PGM/PST banks.

previous item) is set to "Lock" or "Off."

In the Panel >Xpt Assign menu or Panel >Xpt Assign >Table Button

Assign menu, press [Src Name/LCD Color].

The Src Name/LCD Color menu appears.

Turn the knob to select the signal to be set.

Press [Source Name].

A keyboard window appears.

Enter any name of not more than 16 characters, then press [Enter].

For details of keyboard window operation, see "Menu Operations" in

Chapter 2 (Volume 1).

Source signal selection

Number of source signals to be

Setting values

Dvs-9000sf system