Metal Settings - Sony DVS-9000 System User Manual

Hide thumbs Also See for DVS-9000 System:

Table of Contents

Masking the Sketch effect with a selected pattern

Press [Mask] to display the Mask menu and set the type of pattern and

For details, see "Mask Settings" (page 491).

Metal Settings

Applying the Metal effect

DME Special Effect Operations

• To set the color of the sections other than the outlines for Draw

Press [Matte], turning it on, and adjust the following parameters to set the

color of the sections other than the outlines.

• To select the signal to mix with the relief pattern for Relief

In the <Chroma Type> group, select the signal to mix with the relief

Matte: Select a single color. The following parameters can be adjusted.

Video: Select the input video signal.

To invert white and black in the extracted video, or to invert the outlines

and the sections other than the outlines, press [Nega], turning it on.

In the DME menu, select VF7 'Enhanced Video Modify' and HF2 'Metal.'

The Metal menu appears.

Press [Metal], turning it on.

This enables the Metal effect.

Set the parameters.

Setting values

0.00 to 100.00

359.99 to 0.00

Setting values

0.00 to 100.00

359.99 to 0.00

Dvs-9000sf system