Copy And Swap Operations; Copy And Swap Menu Operations - Sony DVS-9000 System User Manual

Hide thumbs Also See for DVS-9000 System:

Table of Contents

Copy and Swap Operations

Accessing the Copy/Swap menu

In the menu operation section top menu selection buttons, press the [Copy/

Swap] button, then press VF1 'Copy/Swap.' The Copy/Swap menu appears.

Here a copy/swap operation on wipe data is described by way of example,

using the Copy/Swap >Wipe menu, but the same general procedure applies to

all of the following menus.

• M/E: Copying and swapping M/E data

• Key: Copying and swapping key data

• Wipe: Copying and swapping wipe data

• DME Wipe: Copying and swapping DME wipe data

• Matte: Copying and swapping matte data

• Color: Copying and swapping color data

• DME: Copying and swapping data by DME channels

For an overview of the concepts involved, see "Copy and Swap" (page 318).

For details of color corrector copy and swap, see Chapter 9 "Color

Corrector" (page 337).

To use DME requires the BKDS-9470 DME Board Set or the MVE-8000A/

9000 Multi Format DME Processor.

Copying and swapping wipe data

As an example, to copy or swap wipe data, use the following procedure.

In the Copy/Swap menu, select HF3 'Wipe.'

The Copy/Swap >Wipe menu appears.

The status area shows lists for the copy/swap source on the left, and the

copy/swap destination on the right.

In the <Data Select> group, select either of the following.

Wipe: The operation applies to wipes in the transition control block.

Key Wipe: The operation applies to wipes in the independent key

transition control block.

Dvs-9000sf system