Applying A Dme Effect To A Key - Sony DVS-9000 System User Manual

Hide thumbs Also See for DVS-9000 System:

Table of Contents

Applying a DME Effect to a Key

For one M/E bank, DME effects (including DME wipes) can be used in up to

two places on the dedicated interface and in only one place on the SDI interface

simultaneously.

When combining the SDI interface with the dedicated interface, you can apply

DME effects to a maximum of three keys. (Requires a setting in setup.)

For details, see "Interfacing With External Devices (Device Interface Menu)"

in Chapter 19 (Volume 3).

Key Setting Operations Using Menus

In the <Mask Source> group, select the mask source.

Wipe: wipe pattern selected for a transition

If you select [Wipe], select the pattern and make modifier settings in

the M/E-1 >Wipe menu (see page 201), then return to this M/E-1

In the case of a wipe pattern selected for a mask, the modifier [Edge]

and [Direction] settings are not available.

Utility 1 Bus: signal selected on the utility 1 bus

When you selected [Utility 1 Bus], press the key delegation button

[UTIL1], turning it on, in the M/E-1 bank and select the signal in the

Set the mask source parameters.

• When wipe is selected

Pattern size

Edge softness

• When utility 1 bus is selected

Reference level for creating mask

To invert the black and white sense of the mask source, press the [Mask

Invert] button, turning it on.

Setting values

0.00 to 100.00

Setting values

+109.59 to –7.31

–100.00 to +100.00

Dvs-9000sf system