Siemens SINUMERIK 840D sl Function Manual page 285
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Simultaneous travel
All axes can be traversed simultaneously in JOG. If several axes are moved simultaneously,
there is no interpolatory relation.
Velocity
The velocity for a JOG traversing movement is determined by the following value settings
depending on the feedrate mode:
● With active linear feedrate (G94)
● With active revolutional feedrate (G95)
The default setting for feedrate velocity is mm/min or rpm for revolutional feedrate or rotary
axes.
Rapid traverse override
If the rapid-traverse-override key is pressed at the same time as the traversing keys, the
movement is executed at the rapid-traverse velocity set in the axis-specific machine data (or
MD32040 $MA_JOG_REV_VELO_RAPID for revolutional feedrate):
MD32010 $MA_JOG_VELO_RAPID (rapid traverse in jog mode)
Extended Functions
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
(SD41100 $SN_JOG_REV_IS_ACTIVE (JOG: revolutional/linear feedrate) = 0):
– With general setting data
SD41110 $SN_JOG_SET_VELO (axis velocity in JOG)
or, for rotary axes, with general setting data
SD41130 $SN_JOG_ROT_AX_SET_VELO
(JOG velocity for rotary axes)
or
– With axial machine data
MD32020 $MA_JOG_VELO (JOG axis velocity),
only if SD41110 = 0.
(SD41100 $SN_JOG_REV_IS_ACTIVE = 1):
– With general setting data
SD41120 $SN_JOG_REV_SET_VELO
(revolutional feedrate of axes in JOG)
or
– With axial machine data
MD32050 $MD_JOG_REV_VELO (revolutional feedrate in JOG),
only if SD41120 = 0.
Manual and Handwheel Travel (H1)
Brief description
285
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Chapters
Table of Contents
