Siemens SINUMERIK 840D sl Function Manual page 809
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
11.5.2
Revolutional feed rate in external programming
The two following setting data can be used to specify that the revolutional feed rate of a
positioning axis should be derived from another rotary axis/spindle:
SD43300 $SA_ASSIGN_FEED_PER_REV_SOURCE(revolutional feed rate for position
axes/spindles)
SD42600 JOG_FEED_PER_REV_SOURCE (control of revolutional feed rate in JOG)
The following settings are possible:
Value
0
>0
-1
-2
-3
Extended Functions
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
Description
No revolutional feed rate selected
The revolutional feed rate is derived from the round axis/spindle with the machine axis
index specified here.
The revolutional feed rate is derived from the master spindle of the channel in which the
axis/spindle is active.
The revolutional feed rate is derived from the rotary axis/spindle with the machine axis
index 0.
The revolutional feed rate is derived from the master spindle of the channel in which the
axis/spindle is active. No revolutional feed rate is selected if the master spindle is at a
standstill.
Positioning Axes (P2)
Programming
809
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Chapters
Table of Contents
