Position-Controlled Spindle Operation (Spcon, Spcof) - Siemens SINUMERIK 840Di sl Programming Manual
Hide thumbs
Also See for SINUMERIK 840Di sl:
- Commissioning manual (632 pages) ,
- Operating manual (470 pages) ,
- Function manual (274 pages)
Table of Contents
Advertisement
7.3
Position-controlled spindle operation (SPCON, SPCOF)
Function
In some cases, position-controlled operation of the spindle may be advisable, e.g., in
conjunction with large-pitch thread cutting with G33, higher quality can be achieved.
Note
The command requires up to three interpolation cycles.
Programming
SPCON or SPCON(n) Activate position control
or
SPCOF or SPCOF(n) Deactivate position control, switch to speed control
or
SPCON(n, m, 0) Activate position control for multiple spindles in a block
or
SPCOF(n, m, 0) Deactivate position control for multiple spindles in a block
Parameter
SPCON
SPCON(n)
SPCOF
SPCOF(n)
SPCON
SPCON(n, m, 0)
SPCOF
SPCOF(n, m, 0)
n
m
Note
SPCON has modal action and remains valid until SPCOF.
The speed is specified with S... M3, M4 and M5 apply in respect of the directions of rotation
and spindle stop.
With synchronized spindle setpoint value linkage, the master spindle must be operated in
position-control mode.
Fundamentals
Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
7.3 Position-controlled spindle operation (SPCON, SPCOF)
Switch master spindle or spindle number n from speed control to
position control
Switch master spindle or spindle number n back from position control to
speed control
Several spindles with number n can be switched from speed control to
position control in one block
Several spindles with number n can be switched back from position
control to speed control in one block
Integers from 1 ... n of spindle number
Integers from 1 ... m of master spindle
Feedrate Control and Spindle Motion
281
- Quick Links:
- Tool Offsets
Hide quick links:
Advertisement
Chapters
Table of Contents
