Toolholder Data - Siemens sinumerik 840d Programming Manual
Hide thumbs
Also See for sinumerik 840d:
- Function manual (920 pages) ,
- Diagnostics manual (714 pages) ,
- Operating turning (713 pages)
Table of Contents
Advertisement
Tables
15
15.2 List of system variables
15.2.3 Toolholder data
Identifier
Type
$TC_CARR1
REAL
$TC_CARR2
REAL
$TC_CARR3
REAL
REAL
$TC_CARR4
REAL
$TC_CARR5
$TC_CARR6
REAL
$TC_CARR7
REAL
15-510
Description: System variable/value range/index
$TC_CARR1[n]
x component of offset vector l1
Caution! All system parameters with the '$TC_' prefix are contained
in the TOA area.
The specialty in this area is that various channels of the NCI can
access these parameters when machine data 28085 =
MM_LINK_TOA_UNIT.
If this parameterization mode is chosen for the NCK, you must be
aware of the fact that changes may interfere with an other channel;
i.e. you must make sure that the change only affects the local
channel.
The max. number of toolholders can be set via machine data.
Default setting is = 0; i.e. NCI has no such data.
$TC_CARR2[n]
y component of offset vector l1
The max. number of toolholders can be set via machine data.
Default setting is = 0; i.e. NCI has no such data.
$TC_CARR3[n]
z component of offset vector l1
The max. number of toolholders can be set via machine data.
Default setting is = 0; i.e. NCI has no such data.
$TC_CARR4[n]
x component of offset vector l2
The max. number of toolholders can be set via machine data.
Default setting is = 0; i.e. NCI has no such data.
$TC_CARR5[n]
y component of offset vector l2
The max. number of toolholders can be set via machine data.
Default setting is = 0; i.e. NCI has no such data.
$TC_CARR6[n]
z component of offset vector l2
The max. number of toolholders can be set via machine data.
Default setting is = 0; i.e. NCI has no such data.
$TC_CARR7[n]
x component of axis of rotation v1
The max. number of toolholders can be set via machine data.
Default setting is = 0; i.e. NCI has no such data.
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
04.00
15
Part pro
Sync O S
R
W
4
R
W
4
R
W
4
R
W
4
R
W
4
R
W
4
R
W
4
Siemens AG 2000. All rights reserved
- Quick Links:
- Using Subprograms
Hide quick links:
Advertisement
Table of Contents
