04.00
0
Preface
Overview of documentation
The SINUMERIK documentation is organized in 3 parts:
• General Documentation
• User Documentation
• Manufacturer/Service Documentation
Target group
This documentation is intended for the programmer.
It provides detailed information for programming the
SINUMERIK 840D/840Di/810D and SINUMERIK FM-NC.
Standard scope
The Programming Guide describes the functionality
included in the standard scope. Extensions or changes
made by the machine tool manufacturer are
documented by the machine tool manufacturer.
For more detailed information on SINUMERIK
840D/840Di/810D and SINUMERIK FM-NC publications
and other publications covering all SINUMERIK controls
(e.g. universal interface, measuring cycles...), please
contact your local Siemens office.
Other functions not described in this documentation
might be executable in the control. This does not,
however, represent as obligation to supply such
functions with a new control or when servicing.
Siemens AG 2000. All rights reserved
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
Structure of the manual
Preface
0
0-13