12.98
2
840D
840D
NCU 572
NCU 571
NCU 573
Line for description for each parameter:
(<Data type identification> / <Minimum value> <Maximum value>
(<Default value> / <Comment>
Data type identifier:
R
I
C
S
Minimum value, maximum value (can be omitted)
Limitations of the entered values which are checked
at input; values outside this range cannot be
entered.
It is possible to specify an enumeration of values
which can be operated via the toggle key; they are
listed preceded by "*", other values are then not
permissible.
Example:
(I/*123456/1/Machining type)
There are no limits for string and character types;
Default value (can be omitted)
Value which is the default value in the corresponding
screen when the cycle is called; it can be changed
via operator input.
Comment
Text of up to 50 characters which is displayed in
front of the parameter input field in the call screen
for the cycle.
Siemens AG 2000. All rights reserved
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) − 04.00 Edition
2.12 Cycles: Setting parameters for user cycles
810D
840Di
for real
for integer
for character (1 character)
for string
Subprograms, Macros
2
2-117