Sony DVS-9000 User Manual page 60
Switcher system
Hide thumbs
Also See for DVS-9000:
- User manual (1228 pages) ,
- Installation manual (42 pages) ,
- Operation manual (24 pages)
Table of Contents
Advertisement
3
4
5
Deleting data from snapshot registers
Use the following procedure.
1
2
3
4
Attaching a name to a snapshot register
Use the following procedure.
60
Snapshot Operations in the Menus
Operation between regions
Operation between regions is possible in the following cases.
• Between the M/E-1 and P/P regions
• Between the USER1 and USER2 regions
• Betweeen two of the DME1 to DME4 (including Global) regions
To select the desired registers, press on the register numbers or register
names in the status area, or use the knobs.
Knob
Parameter
1
From Reg
2
To Reg
To copy without transferring the name, press [W/o Name], turning it on.
Press [Copy].
This carries out the copy.
If, for example, the copy destination register is write-protected or the same
register is specified both as the copy source and destination registers, a
confirmation message appears. Press [OK] to cancel the copy.
In the Snapshot menu, press VF2 'Snapshot' and HF6 'Delete.'
The Snapshot>Snapshot>Delete menu appears.
Press the region display in the upper part of the list to display a selection
window, then select the region in the selection window.
The selected region name appears in the upper part of the list.
To select the desired register, press on the register number or register name
in the status area, or use knob 1.
Knob
Parameter
1
Register
Press [Delete].
Adjustment
Copy source register number
Copy destination register number 1 to 99
Adjustment
Register number
Setting values
1 to 99
Setting values
1 to 99
Advertisement
Table of Contents
