Settings Relating To Video Switching (Transition Menu) - Sony DVS-9000 User Manual
Switcher system
Hide thumbs
Also See for DVS-9000:
- User manual (1228 pages) ,
- Installation manual (42 pages) ,
- Operation manual (24 pages)
Table of Contents
Advertisement
2
3
4
5
Setting the reference output
To adjust the reference output phase with respect to the reference input, adjust
the following parameters in the Switcher>Output menu.
Knob
2
3
Settings Relating to Video Switching (Transition Menu)
For settings relating to video switching, use the Switcher>Transition menu.
To display the Transition menu
In the Engineering Setup menu, select VF3 'Switcher' and HF4 'Transition.'
The status area shows the transition preview, key transition, bus toggle, and
split fader settings for the M/E and P/P banks.
Selecting the bank to which the settings apply
In the Transition menu, using any of the following methods, select the bank to
which the settings apply, then make the settings.
110
Setup Relating to Switcher Processor
To enable the on/off settings made in the Misc menu, press [Safe Title],
turning it on.
Carry out either of the following operations.
To display a box: Press [Box1] or [Box2], turning it on.
In this case, carry out the following steps 4 and 5.
To display a cross: Press [Cross], turning it on.
When you selected [Box1] or [Box2] in step 3, adjust the following
parameters.
Knob
Parameter
Adjustment
2
Box Size
Box size
3
Luminance
Display brightness
a) Adjustable for Box2
When in step 3 you selected [Box1] or [Box2], in the <Box1 Adjust> or
<Box2 Adjust> group, select the aspect ratio (16:9/14:9/4:3).
Parameter
Adjustment
Line
Line phase
Time
Time
Setting values
50.00 to 100.00
a)
0.00 to 100.00
Setting values
−90 to +90
−32.00 to +96.00
Advertisement
Table of Contents
