Sony DVS-9000 User Manual page 138
Switcher system
Hide thumbs
Also See for DVS-9000:
- User manual (1228 pages) ,
- Installation manual (42 pages) ,
- Operation manual (24 pages)
Table of Contents
Advertisement
3
4
Changing the wiring settings
Use the following procedure.
1
2
3
Deleting wiring settings
Use the following procedure.
1
2
138
Setup Relating to Router Interface and Tally
Set the source.
Source From: Specify the source start address for the wiring
configuration.
Source Level: Specify the source level for the wiring configuration.
Knob
Parameter
Adjustment
4
Source From Source start address
5
Source Level Source level
Press [Execute].
This makes the wiring setting according to the specifications in steps 2 and
3.
In the Router/Tally>Wiring menu, press [Modify].
The Modify menu appears.
Referring to steps 2 and 3 in the preceding section "Making new wiring
settings," change the parameters as required. In this case, however, it is not
possible to specify multiple destinations in a single operation, and a single
"Destination Address" must be specified.
Press [Execute].
This updates the wiring settings.
Using either of the following methods, select the wiring whose settings
you want to delete.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
Press [Delete].
This deletes the selected wiring entry.
Setting values
1 to 1024
1 to 8
Advertisement
Table of Contents
