Sony DVS-9000 User Manual page 22
Switcher system
Hide thumbs
Also See for DVS-9000:
- User manual (1228 pages) ,
- Installation manual (42 pages) ,
- Operation manual (24 pages)
Table of Contents
Advertisement
1
2
3
4
To undo the recall of a register
Immediately after recalling the register, press the [UNDO] button to undo the
operation.
22
Recalling a Register
Press the [EFF] button, turning it on.
This allocates the numeric keypad control block to keyframe operations,
and the [RCALL] button lights.
Press the button corresponding to the region you want to select, turning it
on.
You can also press more than one button.
[M/E 1], [P/P]: These select the corresponding M/E-1 and PGM/PST
regions.
[USER 1] to [USER 2]: These select the USER regions.
[DME 1] to [DME 4]: These select DME channels.
[P-BUS]: This selects P-BUS.
[ALL]: This selects all valid regions.
The first button pressed lights green as the reference region, and any
subsequently pressed buttons light amber.
The display shows the name of the reference region, and the number of the
last register recalled for this region.
Enter the number of the register you want to recall, using the numeric
keypad.
To find an empty register, instead of entering a number, press the [.]
(period) button. To search for an empty register common to all currently
selectable regions, press the [.] button again.
To search for an empty register in the 100 range, press [1], [0], [0], [.]
(period) in this order. Similarly, to search for an empty register in the 200
range, press [2], [0], [0], [.] (period).
The register number appears in the display. If the number is followed by a
letter 'e' or 'E', this indicates the following.
e: The selected register is empty for the regions selected in step 2.
E: The selected register is empty for all currently selectable regions.
Press the [ENTER] button.
This recalls the specified register.
Advertisement
Table of Contents
