Table of Contents
Advertisement
Gas Cooktop
E36GC70FSS
planning
information
For 36" model:
E36GC70FSS
Note:
For planning
purposes only. Refer
to Product Installation
Guide on the web at
electroluxicon.com for
detailed instructions.
Specifications subject
to change.
Optional
Accessories
Granite Countertop
Installation Kit
PN # 903103-9010
Grill / Griddle
PN # 318251603
Simmer Plate
PN # 318254200
Wok Ring
PN # 318254301
Black Burner
Knob Kit
PN # 318242223
38
cooking
Gas Deep-Sump Cooktops
13"
max.
cabinet
depth
2
/
" minimum distance between
1
2
rear edge of cutout and nearest
vertical combustible surface
19
/
" min.
1
8
19
3
/
" max.
4
25" min.
24"
Installation Specifications
•
Product Weight – 53 Lbs.
•
Voltage Rating – 120V / 60 Hz / 15 Amps
•
Connected Load (kW Rating) @ 120 Volts = 0.001 kW
(For use on adequately wired 120V, dedicated circuit
having 2-wire service with a separate ground wire.
Appliance must be grounded for safe operation.)
•
Amps @ 120 Volts = 0.008 Amps
•
Always consult local and national electric and gas codes.
•
Recommended location for grounded 120V outlet is
on rear wall in an 8" wide by 10" high area, positioned
22" above floor surface and 12" to right side of cooktop
centerline. Access to underside of cooktop and junction
box must be provided for inspection and service.
•
Cooktop ships with 3/4" factory regulator.
•
LP Gas conversion kit supplied.
•
Overhead cabinetry should not exceed a 13" max. depth.
•
Allow 30" minimum clearance between top of cooktop
and bottom of unprotected wood or metal overhead
cabinetry.
•
Absolute minimum horizontal distance between overhead
cabinets installed to either side of appliance must be
no less than maximum width of appliance.
36"
36"
33
/
"
1
4
19"
Opening to route 48" power
cable & gas supply
•
Allow 24" minimum clearance when bottom of wood or
metal overhead cabinet is protected by not less than
1/8" flame-retardant millboard covered with not less than
No. 28 MGS sheet steel, 0.015" stainless steel, 0.024"
aluminum or 0.020" copper.
•
Allow 2-1/2" minimum distance between rear edge of
cutout to nearest combustible surface above countertop.
•
Allow 7" minimum clearance from edge of cooktop to
nearest combustible wall on either side of unit.
•
Drawers cannot be installed beneath this cooktop.
•
To reduce risk of fire when using overhead cabinetry,
install vent hood that projects horizontally a recommended
minimum of 5" beyond bottom of cabinets.
Combination Installations
For installation details refer to Project Planning Section.
•
Cooktop model E36GC70FSS is approved to be used
over any Electrolux ICON
Gas Cooktop Installation Over 30" Electric Single Wall
Oven Specifications page.)
•
Cooktop model E36GC70FSS is approved to be used
in combination with an Electrolux ICON
Vent. (Refer to Drop-In Cooktop / Downdraft Vent
Countertop Preparation page for detailed installation
specifications.)
30" min. for
unprotected cabinet
18"
24" min. for
min.
protected surface
21
/
"
3
4
4
/
"
1
4
7" min. to nearest
combustible wall
(either side of unit)
8" min.*
33
/
"min.
7
8
34
/
"max.
1
4
* Includes a 5"space beneath
cooktop for connection to
gas supply line
®
Single Wall Oven. (Refer to
®
36" Downdraft
Hide quick links:
Advertisement
Table of Contents
