Chapter 3
Installing the 172 mm Fans
To install the 172 mm fan, complete the following procedure:
1. Lift the latch on the fan-access door and open the door.
NOTE
Verify the connector orientation prior to installing the new fan.
2. Slide the new fan into place with the connector oriented to engage the
socket inside of the fan enclosure.
3. Push the fan assembly firmly into the enclosure to seat the connector.
4. Close the fan-access door and engage the latch by pushing it downward.
5. Slide the chassis back into the rack.
Figure 3-1. Removing the 172 mm Fans
Installing Fans and Power Supplies
LED Indicator
21