HP Integrity rx4610 User Manual page 25
Hp server rx4610 user guide
Hide thumbs
Also See for Integrity rx4610:
- User manual (201 pages) ,
- Service manual (147 pages) ,
- Installation manual (16 pages)
Table of Contents
Advertisement
Chapter 2
7. Close the 120 mm fan cover and tighten the thumbscrew. If the door does
not close then the top cover hooks have not fully engaged into the chassis.
8. Replace the PCI adapter board cover and install the screw that secures it to
the top cover.
9. Close the rear half of the top cover and tighten the two thumbscrews.
10. Push the chassis back into the rack.
11. Connect the keyboard, mouse, and monitor before powering up the system.
12. Power on the system.
13. Power on any peripherals connected to the server that you shut down.
Opening and Closing the HP Server
Figure 2-3. Replacing the Cover
17
Advertisement
Table of Contents
Troubleshooting
