Zone Configuration Menu (D5) - Sony Betacam SX DNW-A100 Maintenance Manual
Digital video hybrid recorder
Hide thumbs
Also See for Betacam SX DNW-A100:
- Maintenance manual (506 pages) ,
- Operation manual (134 pages) ,
- Brochure & specs (14 pages)
Table of Contents
Advertisement
4-3-7. Zone Configuration Menu (D5)
The D5 : ZONE CONFIGURATION menu sets the zone
of the hard disk that this unit uses as a current zone. This
menu is displayed only when disk unit BKNW-116 is
connected to this unit.
The zone of the hard disk used in this unit can be selected
from the eight zones below.
The zone is set to INTERNAL when BKNW-116 is first
connected to this unit.
Zone
Hard disk used
INTERNAL
HDDs built in this unit (ID0 and ID1)
EXT FULl
All HDDs (ID2 to ID9) of BKNW-116
EXT HALF-1
Four HDDs (ID2 to ID5) of BKNW-116
EXT HALF-2
Four HDDs (ID6 to ID9) of BKNW-116
EXT QTR -1
Two HDDs (ID2 and ID3) of BKNW-116
EXT QTR -2
Two HDDs (ID4 and ID5) of BKNW-116
EXT QTR -3
Two HDDs (ID6 and ID7) of BKNW-116
EXT QTR -4
Two HDDs (ID8 and ID9) of BKNW-116
The zone set state of this unit is displayed in the zone
indicator at the right corner of a time data display area as
described below.
Set zone
Lighting state of zone indicator
INTERNAL
No display
[1] [2] [3] [4]
EXT FULL
[1] [2]
EXT HALF-1
[3] [4]
EXT HALF-2
[1]
EXT QTR -1
[2]
EXT QTR -2
[3]
EXT QTR -3
[4]
EXT QTR -4
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
Description of superimpose picture
DISK MAINTENANCE MODE
D5:ZONE CONFIGURATION
*
#INTERNAL
EXT FULL
EXT HALF-1
EXT HALF-2
EXT QTR -1
EXT QTR -2
EXT QTR -3
EXT QTR -4
<<current:INTERNAL
Current zone: INTERNAL
DISK MAINTENANCE MODE
D5:ZONE CONFIGURATION
Recording
INTERNAL
time
EXT FULL
*
#EXT HALF-1
#EXT HALF-2
1.5H
EXT QTR -1
EXT QTR -2
6.0H
EXT QTR -3
EXT QTR -4
3.0H
<<current:EXT HALF-1>>
Current zone: EXT HALF-1
3.0H
1.5H
The zone that is presently set is displayed in the lowest line
1.5H
as a current zone. The zone to be set is selected using an *
1.5H
mark. A # mark indicates the zone size of BKNW-116.
1.5H
n
When the current zone is set to INTERNAL, the # mark is
also displayed in the INTERNAL position. The zone size
of BKNW-116 is unknown at that time.
Caution during change in zone
In BKNW-116, all hard disk drives are initialized in the
FULL, HALF, or QTR state.
Even if the zone is changed from QTR-1 to HALF-1, the
areas (ID6 to ID9) not used in HALF-1 are initialized as
HALF-2. All user data items recorded in BKNW-116 are
erased in this case.
m
. When user data is lost, "All the user data in the disk will
be lost." is displayed as a caution message during change
in setting.
. The zone size of BKNW-116 at the factory is set to
FULL.
4-3. DISK Maintenance Mode (M1)
4-3-7. Zone Configuration Menu (D5)
DISK MAINTENANCE MODE
D5:ZONE CONFIGURATION
(1.5H)
INTERNAL
*
(6.0H)
#EXT FULL
(3.0H)
EXT HALF-1
(3.0H)
EXT HALF-2
(1.5H)
EXT QTR -1
EXT QTR -2
(1.5H)
(1.5H)
EXT QTR -3
(1.5H)
EXT QTR -4
>>
<<current:EXT FULL
Current zone: EXT FULL
DISK MAINTENANCE MODE
D5:ZONE CONFIGURATION
(1.5H)
INTERNAL
EXT FULL
(6.0H)
(3.0H)
EXT HALF-1
(3.0H)
EXT HALF-2
*
(1.5H)
#EXT QTR -1
(1.5H)
#EXT QTR -2
(1.5H)
#EXT QTR -3
(1.5H)
#EXT QTR -4
<<current:EXT QTR-1 >>
Current zone: EXT QTR-1
(1.5H)
(6.0H)
(3.0H)
(3.0H)
(1.5H)
(1.5H)
(1.5H)
(1.5H)
>>
(1.5H)
(6.0H)
(3.0H)
(3.0H)
(1.5H)
(1.5H)
(1.5H)
(1.5H)
4-79
Advertisement
Table of Contents
