Sony Betacam SX DNW-A100 Maintenance Manual page 17
Digital video hybrid recorder
Hide thumbs
Also See for Betacam SX DNW-A100:
- Maintenance manual (506 pages) ,
- Operation manual (134 pages) ,
- Brochure & specs (14 pages)
Table of Contents
Advertisement
. Attachment of inner rails
4. Pull out the inner rails from the two intermediate rails.
5. While pressing the stopper of the inner rail in the
direction of the arrow A in the figure, pull out it in the
direction of the arrow B. (Pull out the other inner rail
in the same way.)
Intermediate rail
Inner rail
Stopper
B
6. Remove the ten screws from both sides (left and right)
of the unit as shown in the figure below.
7. With the removed screws in the step (6), attach the two
inner rails to both sides (left and right) of unit.
Tightening torque: 120 x 10
n
Be sure to use the (B4 x 6) screws when fixing the
inner rail. If other screws are used, a failure occurs in
the operation of the unit.
Inner rail
B4 x 6
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
Outer rail
A
_2
N . m {12.2 kgf . cm}
Inner rail
B4 x 6
. Attachment of rack angles (handles)
8. Remove the four screws from both sides (left and
right) of the unit.
B4 x 6
B4 x 6
n
Keep these screws .
Be sure to use these screws when directly fixing the
side panel without the rack angles.
The use of longer screws such as the screws (PSW4 x
16) for fixing the rack angles will cause a malfunction
of the unit.
9. Attach the two rack angles to both sides (left and right)
of the unit with four screws (PSW4 x 16).
Tightening torque: 120 x 10
PSW4 x 16
Rack angle
PSW4 x 16
1-6. Rack Mounting
B4 x 6
B4 x 6
_2
N . m {12.2 kgf . cm}
Rack angle
PSW4 x 16
1-5
Advertisement
Table of Contents
