Table of Contents
Advertisement
Table 1: Required and amending documentation
Title
CytroBox hydraulic power unit
Technical data, operating conditions, performance limits and project planning
information
Pressure relief valve, direct operated; type DBD
Includes technical data, operating conditions and performance limits.
Pressure relief valve, direct operated (safety valve according to Pressure
Equipment Directive 2014/68/EU); type DBD...1X/..E
Includes amending information on data sheet 25402.
Filter elements type 1.; 2.; 4.; 6.; 7. and 20. Filter elements
Includes technical data, operating conditions and performance limits.
Hydraulic fluids based on mineral oils and related hydrocarbons
Describes the requirements on hydraulic fluids on mineral oil basis and related
hydrocarbons for operation with Rexroth hydraulic components and helps you to
select a hydraulic fluid for your hydraulic system
Environmentally compatible hydraulic fluids
Includes application notes and requirements for Rexroth hydraulic components.
Sytronix, SvP 7020 IMC, variable-speed pump drives
Includes a description how to commission SvP 7020 IMC.
1 About this documentation
1.1 Validity of the documentation
This documentation applies to the following product:
• Hydraulic power unit type CytroBox, for material numbers, refer to data sheet 51057.
These operating instructions apply only to the hydraulic power unit as such.
If the basic device is operated with other attachments, e.g. hydraulic control,
accumulator station, documentation is required for the entire scope of delivery.
This documentation is intended for assemblers, operators, service engineers and
system end-users and machine and system manufacturers.
This documentation contains important information on the safe and proper transport,
assembly, commissioning, operation, use, maintenance, disassembly and simple
troubleshooting of the product.
▶
You should read this documentation thoroughly, and in particular chapter 2
"Safety instructions" and chapter 3 "General information on damage to property
and damage to product", before handling the hydraulic power unit.
1.2 Required and amending documentation
▶
Also observe the operating instructions and documentation of the overall
machinery/system.
▶
The hydraulic power unit must not be commissioned until you have been
provided with the documentation marked with the book symbol
understood and observed it.
About this documentation
Document number
Document type
51057
Data sheet
25402
Data sheet
25402-B
Operating
instructions
51420
Data sheet
90220
Data sheet
90221
Data sheet
R911376148
Description of the
commissioning
CytroBox, RE 51057-B/11.19, Bosch Rexroth AG
7/128
and you have
Advertisement
Table of Contents
