Table of Contents
Advertisement
12/128 Safety instructions
Bosch Rexroth AG, CytroBox, RE 51057-B/11.19
Intended use includes having read and understood this documentation, especially
chapter 2 "Safety instructions" and chapter 3 "General information on damage to
property and damage to product".
2.3 Improper use
Any use deviating from the intended use is improper and thus not admissible.
Bosch Rexroth AG does not assume any liability for damage caused by improper use.
The user assumes all risks involved with improper use.
The hydraulic power unit is not suitable for operation in explosive environments.
Improper use of the hydraulic power unit includes:
▶
Non-compliance with the technical data, operating conditions, performance limits
and environmental conditions specified in chapter 16.
▶
Operation of the hydraulic power unit with hydraulic fluid not complying with the
specifications in chapter 16.
▶
Use of spare parts that are not approved by the manufacturer.
▶
Mechanical modification of the hydraulic power unit.
▶
Welding or soldering works at the hydraulic power unit.
2.4 Qualification of personnel
The activities described in this documentation require basic knowledge of mechanics,
electrics and hydraulics as well as knowledge of the appropriate technical terms.
For transporting and handling the hydraulic power unit, additional knowledge of how
to handle lifting gear and the necessary attachment devices is required. In order to
ensure safe use, these activities may only be carried out by a corresponding expert or
an instructed person under the direction and supervision of an expert.
Experts are those who are able to recognize potential dangers and apply the
appropriate safety measures due to their professional training, knowledge and
experience, as well as their understanding of the relevant conditions pertaining
to the work to be undertaken. An expert must observe the relevant specific
professional rules and have the necessary hydraulic and electrical expert knowledge.
Required experts are for example:
• Mechatronics engineer with additional hydraulic training
• Application engineer for parameterization of the drive parameters
• Automation engineer for parameterization of the field bus communication between
hydraulic power unit and machine control
Bosch Rexroth offers measures supporting the training in specific fields.
Please find an overview of the training contents on the internet at:
http://www.boschrexroth.de/training
Advertisement
Table of Contents
