7 Assembly
7.1 Unpacking the hydraulic power unit
▶
Before opening the packaging and/or loosening the tension belts, make sure that
the hydraulic power unit cannot fall over.
▶
Remove the packaging of the hydraulic power unit.
▶
Check the hydraulic power unit for obvious defects, for example transport
damage, leakage or other external damage, and for completeness,
see chapter 4 "Scope of delivery".
▶
Use the hydraulic power unit only in technically perfect condition.
▶
Dispose of the packaging material in accordance with the national regulations
in your country and/or your company-internal specifications/procedures.
7.2 Installing the hydraulic power unit
Falling, tumbling or uncontrolled position change of the hydraulic power unit!
Risk of injury! Damage to property!
▶
Make sure that the hydraulic power unit is only installed and assembled by
qualified personnel. See chapter 2.4 "Qualification of personnel".
▶
Observe the information on handling the product in chapter 6
"Transport and storage".
▶
Position the hydraulic power unit on a suitable foundation.
▶
Observe the specifications on the total weight.
Damage to the surface/oil tank due to rough handling and incorrect positioning!
Damage to property!
▶
Make sure that the hydraulic power unit is correctly positioned.
Vibrations in the environment!
Damage to property!
▶
Connect the hydraulic power unit to the machine via hydraulic hoses.
Do not use any rigid pipelines.
To install the hydraulic power unit, you should proceed as follows:
▶
Put the hydraulic power unit on a level ground.
▶
Level the hydraulic power unit using the adjustable machine feet so that its
longitudinal and transverse axis are horizontal.
WARNING
NOTICE
CytroBox, RE 51057-B/11.19, Bosch Rexroth AG
Assembly 59/128