Messages
Always check the patient first. If any problem or message persists, contact qualified service personnel.
Messages are listed here in alphabetical order.
•
Agent Mixture
−
Mixture of halogenated agents is detected. Check the
ventilator and agent vaporizer settings.
•
Alarm setup changed from Central
−
Check the alarm limits and the arrhythmia alarm priorities,
see "Alarms" and "ECG."
•
Alarms silenced from Central
−
If required, turn on the bedside alarms through
Setup
- Audio ON/OFF - Activate Alarms.
•
Alarm volume changed
−
The network connection is lost, and the local alarm volume is
increased. Readjust volume if desired.
•
Apnea/No Breath
−
Check the patient status.
−
Check the ventilator and breathing circuit.
•
Arrhythmia Paused
−
ECG: Check the patient status. Check the electrodes.
•
Art disconnect/ABP disconnect/UAC disconnect
−
IBP: Check the patient status.
−
Check the Art/ABP/UAC line.
124
•
Asystole
−
Check the patient status.
−
Check the electrodes.
•
Battery A temperature high, Battery B temperature high
−
Replace the battery.
−
If the problem persists, contact authorized service personnel.
•
Battery empty, Battery low
−
Replace the battery, see
Alarms
the monitor to power outlet.
•
Brady
−
Check the patient status.
•
Call service: UMBC error
−
UMBC: Contact authorized service personnel.
•
Check D-Fend
−
Check that the water trap is properly attached to the module.
•
Check OCRG
−
New OCRG snapshot is created, please check.
•
Check NIBP
−
Check the patient status.
−
Check the measurement setup.
−
Check the cuff and hoses.
"Replacing the
batteries", or connect