Program Blocks - Miele PG 8581 Operating Instructions Manual
Dental washer-disinfector
Hide thumbs
Also See for PG 8581:
- Operating instructions manual (144 pages) ,
- Supplementary document (40 pages) ,
- Operating instructions manual (144 pages)
Table of Contents
Advertisement
Program blocks
The wash block sequence is pre-determined and is the same as the
sequence in the program chart (see "Program charts").
-
Pre-rinse 1
to
3
Pre-washing removes coarse stains and foam-building substances.
Main wash 1
2
-
and
Depending on the wash items, cleaning generally occurs at temper-
atures between 113°F/45°C and 149°F/65°C with the addition of an
appropriate cleaning agent.
Interim rinse 1
4
-
to
In the interim rinse stages, the process chemicals from the
previous wash blocks are rinsed off and neutralized where neces-
sary by adding appropriate neutralizing agents.
Final rinse 1
2
-
and
To avoid deposits and corrosion on the wash items, demineralized
(DI) water should preferably be used if available for the final rinse.
According to the A
thermally at temperatures of 176°F to 203°F/80°C to 95°C and with
relevant holding times.
Drying
-
Adequate drying reduces the risk of corrosion by residual moisture
on the wash items.
Program block parameters are accessible only to Miele Service,
with the exception of the dispensing of rinsing agent and drying pa-
rameters.
concept of EN ISO 15883, disinfection occurs
0
Program settings
89
- Quick Links:
- Maintenance
- Technical Faults and Messages
Hide quick links:
Advertisement
Table of Contents
