Cancel With Fault Code - Miele PG 8581 Operating Instructions Manual
Dental washer-disinfector
Hide thumbs
Also See for PG 8581:
- Operating instructions manual (144 pages) ,
- Supplementary document (40 pages) ,
- Operating instructions manual (144 pages)
Table of Contents
Advertisement
Cancel with fault code
If a program is canceled and a fault code appears, e.g.,
number), there could be a serious technical fault.
In the event of a program being canceled and a fault code being shown:
Use the button to switch the machine off.
Wait approximately 10 seconds before switching the machine on again with the but-
ton.
Acknowledge the fault code by entering your PIN code.
Start the previously selected program again.
If the same message appears again:
Make a note of the fault message.
Use the button to switch the machine off.
Contact Miele Service.
Please also read the notes regarding the following fault codes.
Problem
Fault 403-405
Fault 406–408
Fault 412–414
Fault 422
Possible cause and solution
A program has been canceled because water intake by the
machine was insufficient or severely restricted.
Turn on the faucets fully.
Follow the further information provided in the
ter intake
message.
A program was canceled because the water flow rate is in-
sufficient.
Check whether the faucets are fully turned on.
Refer to the information regarding minimum flow pres-
sure in "Connection to the water supply" and "Technical
data".
Check the filters in the water supply.
In this instance, please contact Miele Service for advice.
A program was canceled because the water flow rate is too
high.
Refer to the information regarding recommended maxi-
mum flow pressure and maximum permissible static wa-
ter pressure in "Connection to the water supply" and
"Technical data".
In this instance, please contact Miele Service for advice.
The salt supply in the water softener has been used up.
Reactivation is no longer possible. The machine will be
locked for further use with the next reactivation.
Refill with reactivation salt.
Frequently asked questions
Fault XXX
(where XXX represents a
Check wa-
113
- Quick Links:
- Maintenance
- Technical Faults and Messages
Hide quick links:
Advertisement
Table of Contents
