Process-Related Faults And Messages - Miele PG 8581 Operating Instructions Manual
Dental washer-disinfector
Hide thumbs
Also See for PG 8581:
- Operating instructions manual (144 pages) ,
- Supplementary document (40 pages) ,
- Operating instructions manual (136 pages)
Table of Contents
Advertisement
Frequently asked questions
Process-related faults and messages
Problem
Drying during program deacti-
vated
Wrong code entered
Test program: Test object
can now be removed
Program cancelled
Program continued
Peak load cut-out
All settings reset
All program settings reset
118
Possible cause and solution
Drying cannot be selected at the start of a program be-
cause drying is not available for the selected program.
Start the program without drying.
Or
Have the drying parameters for this program adjusted by
Miele Service.
The PIN code entered is not the same as the code saved.
Enter the PIN code again.
Report the loss of the PIN code to Miele Service.
This is not a fault.
A test program is running to check performance. At certain
points in the program, the sequence is interrupted so that
samples can be taken.
Take a sample.
or
Wait. The program will continue automatically in approx.
30 seconds.
or
Continue the program without delay by pressing the
Start/Stop button.
This is not a fault.
A program which was running was canceled by the user.
The wash cabinet interior can be very hot.
When the door is opened, hot steam and process chemi-
cals can escape. Protective measures for personal safety
must be observed.
This is not a fault.
The process of canceling a program was not completed.
The program which was running continued without inter-
ruption.
This is not a fault!
Individual components of the machine are paused while
there is a peak load signal from your energy management
system.
This is not a fault.
A user has restored factory default settings.
Confirm the message with OK.
This is not a fault!
A user has restored the factory default setting for the pro-
gram.
Confirm the message with OK.
- Quick Links:
- Maintenance
- Technical Faults and Messages
Hide quick links:
Advertisement
Table of Contents
