Installation; Installation And Alignment - Miele PG 8581 Operating Instructions Manual
Dental washer-disinfector
Hide thumbs
Also See for PG 8581:
- Operating instructions manual (144 pages) ,
- Supplementary document (40 pages) ,
- Operating instructions manual (136 pages)
Table of Contents
Advertisement
Installation and alignment
Please refer to the installation diagram provided.
In order to reduce the risk of water damage, the area around the
machine should be limited to furniture and fittings that are designed
for use in commercial environments.
The machine must be stable and horizontal.
You can compensate for any unevenness in the floor level and height
of the machine by adjusting the four feet. The feet can be screwed
out to a maximum of 2 3/8" (60 mm).
Do not lift the machine by protruding parts such as the control
panel.
They could be damaged or torn off.
Some metal parts pose a risk of injury/being cut.
Wear cut-resistant protective gloves when transporting and setting
up the machine.
For transport by means of a hand truck, the machine must be in
its original packaging or placed on a stable, continuous support.
Otherwise, components in the base of the machine can be dam-
aged.
The machine is suitable for the following types of installation:
- Freestanding.
- Slot-in:
The machine can be installed beside other machines or furniture or
in a suitable niche. The niche must be at least 23 5/8" (600 mm)
wide and 23 5/8" (600 mm) deep.
- Building under:
The machine can be built under a continuous countertop or the
draining board of a sink. The space provided must be at least
23 5/8" (600 mm) wide, 23 5/8" (600 mm) deep and
32 5/16" (820 mm) high.
Installation
129
- Quick Links:
- Maintenance
- Technical Faults and Messages
Hide quick links:
Advertisement
Table of Contents
