HP ProCurve 5300xl Series Management Manual page 506
Advanced traffic
Hide thumbs
Also See for ProCurve 5300xl Series:
- Access security manual (292 pages) ,
- Specification sheet (12 pages) ,
- Management and configuration manual (508 pages)
Table of Contents
Advertisement
IP Routing Features
Configuring Static IP Routes
11-20
To configure a null static route to drop packets destined for network
209.157.22.x, enter the following commands:
HPswitch(config)# ip route 209.157.22.0 255.255.255.0
reject
HPswitch(config)# write memory
Syntax: ip route < ip-addr > < ip-mask > reject
or
ip route < ip-addr >/< mask-bits > reject
The < ip-addr > parameter specifies the network or host address. The routing
switch will drop packets that contain this address in the destination field
instead of forwarding them.
The < ip-mask > parameter specifies the network mask. Ones are significant
bits and zeros allow any value. For example, the mask 255.255.255.0 matches
on all hosts within the Class C sub-net address specified by <ip-addr>. Alter-
natively, you can specify the number of bits in the network mask. For example,
you can enter 209.157.22.0/24 instead of 209.157.22.0 255.255.255.0.
The reject parameter indicates that this is a null route. You must specify this
parameter to make this a null route.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
