Displaying Mstp Statistics And Configuration; Displaying Mstp Statistics - HP ProCurve 5300xl Series Management Manual

Advanced traffic

Hide thumbs Also See for ProCurve 5300xl Series:

Table of Contents

9. To view the current pending MSTP configuration, use the show spanning-

tree pending command (page 6-77).

Displaying MSTP Statistics and Configuration

MSTP Statistics:

show spanning-tree [< port-list >]

show spanning-tree instance < ist | 1..16 >

MSTP Configuration

show spanning-tree [ port-list ] config

show spanning-tree [ port-list ] config instance < ist | 1..16 >

show spanning-tree mst-config

show spanning-tree pending< < instance | ist > | mst-config >

Displaying Switch Statistics for the Common Spanning Tree. This

command displays the MSTP statistics for the connections between MST

regions in a network.

Syntax: show spanning-tree

This command displays the switch's global and regional

spanning-tree status, plus the per-port spanning-tree

operation at the regional level. Note that values for the

following parameters appear only for ports connected to active

devices: Designated Bridge, Hello Time, PtP, and Edge.

Syntax: show spanning-tree < port-list >

This command displays the spanning-tree status for the

designated port(s). You can list data for a series of ports and

port trunks by specifying the first and last port or trunk of any

consecutive series of ports and trunks. For example, to display

data for port A20-A24 and trk1, you would use this command:

show spanning-tree a20-trk1

Spanning-Tree Operation

802.1s Multiple Spanning Tree Protocol (MSTP)

Show Quick Links

Table of Contents