HP ProCurve 5300xl Series Management Manual page 243

Advanced traffic

Hide thumbs Also See for ProCurve 5300xl Series:

Table of Contents

Displaying Per-Instance MSTP Configurations. These commands dis

plays the per-instance port configuration and current state, along with

instance identifiers and regional root data.

Syntax: show spanning-tree config instance < ist | 1..16 >

The upper part of this output shows the instance data for the

specified instance. The lower part of the output lists the

spanning-tree port settings for the specified instance.

Syntax: show spanning-tree < port-list > config instance < ist | 1..16 >

This command shows the same data as the above command,

but lists the spanning-tree port parameter settings for only the

specified port(s) and/or trunk(s). You can list data for a series

of ports and port trunks by specifying the first and last port

or trunk of any consecutive series of ports and trunks. For

example, to display data for port A20-A24 and trk1, use this

show spanning-tree a20-trk1 config instance 1

Figure 6-31. Example of the Configuration Listing for a Specific Instance

Spanning-Tree Operation

802.1s Multiple Spanning Tree Protocol (MSTP)

Instance-Specific Data

Port Settings for the

specified instance.

Show Quick Links

Table of Contents

Troubleshooting