The asterisk indicates
that you must reboot the
switch to cause the
Mesh configuration
change to take effect.
Figure 7-10. After Saving a Mesh Configuration Change, Reboot the Switch
8.
9. To activate the mesh assignment(s) from the Main menu, reboot the
(The switch cannot dynamically reconfigure ports to enable or disable mesh
ing, so it is always necessary to reboot the switch after adding or deleting a
port in the switch mesh.)
Press [0] to return to the Main menu.
switch by pressing the following keys:
a.
[6] (for Reboot Switch)
b. Space bar (to select Yes).
13 (to start the reboot process).
c.
Switch Meshing
Configuring Switch Meshing
7-13