HP ProCurve 5300xl Series Management Manual page 309
Advanced traffic
Hide thumbs
Also See for ProCurve 5300xl Series:
- Access security manual (292 pages) ,
- Specification sheet (12 pages) ,
- Management and configuration manual (508 pages)
Table of Contents
Advertisement
Using QoS Classifiers To Configure Quality of Service for Outbound Traffic
2.
Configure the priorities for the DSCPs you want to use.
Figure 8-14. Assigning 802.1p Priorities to the Selected DSCPs
3.
Assign the DSCP policies to the selected device IP addresses and display
the result.
Figure 8-15. The Completed Device-Priority/Codepoint Configuration
The switch will now apply the DSCP policies in figure 8-14 to IPv4 packets
received on the switch with the specified IP addresses (source or destination).
This means the switch will:
Overwrite the original DSCPs in the selected packets with the new DSCPs
■
specified in the above policies.
■
Assign the 802.1p priorities in the above policies to the appropriate
packets.
Quality of Service (QoS): Managing Bandwidth More Effectively
DSCP Policies
Configured in this step.
8-35
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
