HP ProCurve 5300xl Series Management Manual page 258

Advanced traffic

Hide thumbs Also See for ProCurve 5300xl Series:

Table of Contents

Switch Meshing

Configuring Switch Meshing

Figure 7-9. Example of Mesh Group Assignments for Several Ports

3. In the Group column, move the cursor to the port you want to assign to

the switch mesh.

Press [M] to choose Mesh for the selected port.

5. Use the up-arrow or down-arrow key to select the next port you want to

include in your mesh domain, then press

were adding ports A1 and A2 to your mesh domain, the screen would

appear similar to figure 7-9:

Repeat step 5 for all ports you want in the mesh domain.

For meshed ports, leave the Type setting blank. (Meshed ports do not accept

a Type setting.)

All meshed ports in the switch automatically belong to the same mesh domain.

(See figure 7-2 on page 7-4.)

7. When you finish assigning ports to the switch mesh, press [Enter], then [S]

(for Save). You will then see the following screen.

again. For example, if you

Ports A1 and A2 configured

for meshing.

Show Quick Links

Table of Contents

Troubleshooting