Access Control Lists (ACLs) for the Series 3400cl and Series 6400cl Switches
Display an ACL Summary
This command lists the configured ACLs, regardless of whether they are
assigned to any interfaces.
Syntax: show access-list
List a su mmary table of t h e name, type, and ap plication status
of all ACLs configured on the switch.
For example:
Figure 10-21. Example of a Summary Table of Access lists
Term
Meaning
Type
Shows whether the listed ACL is
(Extended; protocol, source, and destination data).
Appl
Shows whether the listed ACL has been applied to an interface (
Name
Shows the name or ID number assigned to each ACL configured in the switch.
Display the Content of All ACLs on the Switch
This command lists the configuration details for every ACL configured in the
running-config file, regardless of whether you have assigned any to filter traffic
on switch interfaces.
Syntax: show access-list config
List the configured syntax for all ACLs currently configured
on the switch.
In this switch, ACLs 105 and "Red VLAN
Inbound" exist in the configuration but
are not applied to any interfaces s and
thus do not perform packet filtering.
std
(Standard; source-address only) or
Displaying ACL Data
ext
yes/no
).
10-59