Siemens SINUMERIK 828D Function Manual page 82
Sinumerik operate acceptance test
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
Actions for hardware replacement and modifications
5.2 Effect of the acceptance test for specific measures
Measure
Function expansion or new
functions (e.g. additional ac‐
tuator, additional SLS level)
Change the safety program
Data transferred to additional
machines via series commis‐
sioning
Regarding the acceptance test, the notes in the documentation of the SW upgrade must be
1)
carefully observed.
An update involves an update to a new Service Pack (SP) or a new Hotfix (HF) within a
2)
software line, e.g.:
04.07.02.00 (02=Service Pack; 00=Hotfix) auf 04.07.03.00 (does not take into account any
change of the Safety functionality).
An upgrade involves an upgrade to a new software release, e.g.:
3)
04.07.xx.xx to 04.08.xx.xx (does not take changes of the Safety functions into account).
If no drive checksums have changed, then a complete function test Part 2 does not have to
4)
be performed. However, a test should be performed with reduced test scope.
Note
Test with reduced test scope
Test of Safety Integrated Functions at any axis (each NCU and each NX) and a comparison
with the test results before the upgrade.
Note
If the results of function test, Part 2 are taken from another identical machine, then this is the
sole responsibility of the machine manufacturer and should be appropriately commented in
the acceptance report.
82
Documentation
Inclusion of the SI func‐
tion per axis, function ta‐
ble
Inclusion of SI function
per axis, function table,
safety printout the Lan‐
cia panties scam
Include machine descrip‐
tion (check the SW ver‐
sion)
Function test
Function test
Part 1
Part 2
Yes, only for
Yes, only
the tests influ‐
tests influ‐
enced by the
enced by the
function ex‐
function ex‐
pansion
pansion
Yes, only
No
Points 2.4,
2.5 and 2.6
(Page 90)
Yes
No
Function Manual, 08/2018, A5E39460574B AC
Supplemen‐
Completion of
tary meas‐
the report
ures
No
Document
changed check‐
sum
No
Document
changed check‐
sum
Points 4.1
Document
and 4.5
changed check‐
(Page 90)
sum
SINUMERIK Operate acceptance test
Advertisement
Table of Contents
