Siemens SINUMERIK 828D Function Manual page 79
Sinumerik operate acceptance test
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
Measure
Documentation
Changed system
Inclusion of config‐
clock cycle (SI
uration data
clock cycle, IPO re‐
mains the same)
Changed IPO
Inclusion of config‐
clock cycle (check‐
uration data
sum NCK 0
changes)
Change to the SI
Inclusion of config‐
clock cycle
uration data
Changed PROFI‐
Inclusion of config‐
safe clock cycle
uration data
Changes to the
Adapt configura‐
drive assignment
tion diagram
Changed
Supplement, SI
SAFE_USER_DA‐
function per axis,
TA
function table
Reconfigured
Inclusion of config‐
PROFIsafe I/O in
uration data
S7
Changed within
Supplement con‐
the scope of "mod‐
figuration diagram
ular PROFIsafe"
and function table
Change within the
Supplement con‐
scope of "F_SEND/
figuration diagram
F_RECEIVE"
and function table
SW upgrade
Supplementary
(NCU/drive/PLC)
software version
2
Changed jerk and/
or acceleration
SW upgrade
Supplementary
3
software version
(NCU/drive/PLC)
Software upgrade
Supplementary
(HMI)
software version
Changing an indi‐
Inclusion of SI
vidual limit value
function per axis
(e.g. SG limit)
Expanded function
Inclusion of the SI
(e.g. additional ac‐
function per axis,
tuator, additional
function table
SG stage)
SINUMERIK Operate acceptance test
Function Manual, 08/2018, A5E39460574B AC
Actions for hardware replacement and modifications
5.2 Effect of the acceptance test for specific measures
Function test
Function test
Part 1
Part 2
No
Yes
No
Yes
No
Yes
Yes, only Point 2.7
No
(Page 87)
Yes, only Point 2.6
No
(Page 87) for the
changed axes
Yes, only for the
Yes, only for the
tests influenced by
tests influenced by
the function expan‐
the function expan‐
sion
sion
No
No
Yes, only Points
No
2.6 and 2.7
(Page 87)
Yes, only Points
No
2.6 and 2.7
(Page 87)
No
No
1
1
No
No
1
1
No
No
1
1, 4
No
No
No
Yes, only test the
corresponding
functions at the ax‐
es involved
Yes, only for the
Yes, only for the
tests influenced by
tests influenced by
the function expan‐
the function expan‐
sion
sion
Supplementary
Completion of the
measures
report
No
No
No
Document
changed check‐
sum
No
Document
changed check‐
sum
No
Document
changed check‐
sum
Point 4.1 (Page 87) Document
changed check‐
sum
No
Document
changed check‐
sum
Only test the modi‐
Document
fied configuration
changed check‐
sum
No
Document
changed check‐
sum
No
Document
changed check‐
sum
No
Document
1
changed check‐
sum
Yes, only Point 4.3
No
(Page 87)
Points 4.3 and 4.4
Document
(Page 87)
changed check‐
sum
No
No
No
Document
changed check‐
sum
No
Document
changed check‐
sum
79
Advertisement
Table of Contents
