Acceptance Test Wizard - Siemens SINUMERIK 828D Function Manual
Sinumerik operate acceptance test
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
3.3.2
Acceptance test Wizard
SINUMERIK Operate has an acceptance test wizard, which uses specific input screens to
guide the person authorized by the machine manufacturer through the acceptance test. After
all of the relevant data has been entered and the test cases are concluded, a log template is
generated, which must be completely filled in, checked, and signed. You can find examples
of a complete acceptance test in the annex Example contents of the acceptance test
(Page 87).
The acceptance test integrated in SINUMERIK Operate, is used to support the user (test
engineer) for the following tasks as part of an acceptance test:
● Coordination and execution of SI function tests
● Generation of a certificate (Page 73) (acceptance report) to document the state of all SI-
relevant functions when the equipment is shipped.
Note
Automation
In compliance with the relevant directives, the result status of a test (successful/not successful)
must be determined by the user. As a consequence, the acceptance test cannot be completely
automated.
The SINAMICS Integrated functions needed for the acceptance test wizard (such as
acceptance test mode and Safety logbook) are integrated in the acceptance test wizard.
In addition, the acceptance test wizard can be adapted by the machine manufacturer to define
test cases and default settings which, for example, must be carried out for a specific type of
machine.
SINUMERIK Operate acceptance test
Function Manual, 08/2018, A5E39460574B AC
Acceptance test wizard of SINUMERIK Operate
3.3 SINUMERIK 840D sl - system-integrated Safety Functions
45
Advertisement
Table of Contents
