11/2006
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
Note
For both data blocks, you can use any transformations from all available
transformations (24100 $MC_TRAFO_TYPE_1, 24200 $MC_TRAFO_TYPE_2
etc.). The two data blocks need not be directly next to each other. However, the
1st data block must always be used for "Cylinder surface transformation without
groove side offset" (= 512) and the 2nd data block for "Cylinder surface
transformation with groove side offset" (=513).
9 Additional Functions
9.3
Cylinder surface transformation
9-139