8 Tool Management
8.10
Configuring the operator interface
8.10.2
Configuring lists
Activate the
configuration file
Activate use of
OEM data
Adapt the
configuration file
8-110
To modify existing lists (including an integrated additional list) you must proceed
as follows:
Set the following machine data:
MD 9478 $MM_TO_OPTION_MASK, bit 8
Analyze the file TO_MILL.INI
The configuration file TO_MILL.INI, in which you configure changes from the
standard settings, is analyzed (see chapter 8.10.3 "Creating the configuration
file").
If you use user–defined OEM data, set the following machine data:
MD 18080 $MN_MM_TOOL_MANAGEMENT_MASK, Bit 2
Provide memory for user data
MD 18094 $MN_MM_NUM_CC_TDA_PARAM
Number of user–defined parameters
MD 18095 $MN_MM_TYPE_CC_TDA_PARAM[n]=4
Data type (REAL) of user–defined parameters
MD 20310 $MC_TOOL_MANAGEMENT_MASK, Bit 2
Activate user functions
Texts for user–defined parameters (optional)
If you want to change the column headers and cursor texts of the user–defined
parameters, define new texts (see chapter 8.10.7 "Defining texts").
Define all changes from the standard settings in the configuration file
TO_Mill.INI (see chapter 8.10.3 "Creating the configuration file").
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
© Siemens AG 2006 All Rights Reserved
11/2006