Creating A Series Machine Start-Up File Using Hmi Advanced - Siemens SINUMERIK 840Di Manual
Hide thumbs
Also See for SINUMERIK 840Di:
- Function manual (2050 pages) ,
- Diagnostic manual (880 pages) ,
- System overview (55 pages)
Table of Contents
Advertisement
06.03
14.2
Creating a series machine start-up file using HMI
Advanced
Selecting contents
Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
14.2 Creating a series machine start-up file using HMI Advanced
The creation of a series machine start-up file is divided into the following steps:
1. Open the menu to create a series machine start-up file:
Operating area switchover > Services > key:up ">" > Series machine
start-up > Create start-up archive
2. Select the contents and assign the file name
3. Create the series machine start-up file by selecting the device to which you
wish the file to be output
Note
Because of its file extension ".arc", the series machine start-up file is also called
archive.
A series machine start-up file can be created for the following components:
S
NC with/without compensation data
S
PLC
S
HMI
When selecting, any combinations are possible.
However, it is recommended to save the individual components separately in
separate series machine start-up files. It is thus possible to reload them inde-
pendently of each other and with maximum flexibility.
Note
Compensation data must only be archived if the series machine start-up file is
to be reloaded into the same control system (backup).
14 User Data Backup/Series Machine Start-Up
14-451
Advertisement
Table of Contents
