Display And Input - Siemens SINUMERIK 840Di Manual
Hide thumbs
Also See for SINUMERIK 840Di:
- Function manual (2050 pages) ,
- Diagnostic manual (880 pages) ,
- System overview (55 pages)
Table of Contents
Advertisement
06.03
Overview of
setting data
Data description
10.2.1
Display and input
Machine data
screen forms
Bit editor
Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
The setting data are divided into the following areas:
Table 10-2
Overview of setting data
Area
from 41000 to 41999
from 42000 to 42999
from 43000 to 43999
For a detailed description of the machine or setting data, please refer to the de-
scription of the function that uses the machine data in question, e.g.:
References:
/FB/
Description of Functions – Basic Machine
/FB/
Description of Functions – Extended Functions
/FB/
Description of Functions – Special Functions
A brief table of all machine and setting data is to be found in:
References:
/LIS/
Lists
Machine and setting data.
Note
To search for information regarding machine and setting data, it is recom-
mended to use the search functions in the electronic documentation:
SINUMERIK DOConCD.
To display and input machine data, appropriate screen forms are provided.
The screen forms are found on the HMI Advanced user interface at:
Area Switchover –> Start-up –> Machine Data.
Notice
To input machine data, at least the password of protection level 2 (default:
"EVENING") must be set.
To facilitate the input of machine data in the bit format (HEX), a bit editor is pro-
vided.
If the input cursor is on a machine data in HEX format in the MD list, you can
call up the editor by pressing the toggle key (in the middle of the cursor keys).
10 NC Start-Up with HMI Advanced
10.2 Machine and setting data
Designation
General setting data ($SN_....)
Channel-specific setting data ($SC_....)
Axis-specific setting data ($SA_....)
10-275
Advertisement
Table of Contents
