Installation; Lifting The Cabinet Off The Transport Pallet - Siemens SINAMICS G150 Operating Instructions Manual

Converter cabinet units 75 kw to 1500 kw

Hide thumbs Also See for SINAMICS G150:

Table of Contents

Installation

The applicable local guidelines regarding the transportation of the cabinet from the transport

palette to the installation location must be observed.

A crane transport assembly (option M90) can also be fitted on the top of the cabinet.

The fixing screws of the transport pallets can be removed without having to lift the cabinet

unit. The positions of the fixing screws are indicated by red markings on the outside of the

For cabinet units without base (in the figure on the left), the fixing screws of the transport

pallets must be removed from the underside of the pallet.

For cabinet units with base (in the figure on the right), the fixing screws of the transport pallet

are accessible only after the cover is opened. They can then be loosened and removed

directly from the front.

The weight specified on the packaging and the designated center of gravity must always be

taken into account when the cabinet is lifted and transported.

Particular attention must be paid to this potential danger once you have unscrewed the

cabinet units from the transport pallet.

Converter cabinet units

Operating Instructions, 03/2012, A5E03263466A

Lifting from the transport pallet (left: without base; right: with base)

Mechanical installation

3.3 Assembly