Siemens SINAMICS G150 Operating Instructions Manual page 246

Converter cabinet units 75 kw to 1500 kw

Hide thumbs Also See for SINAMICS G150:

Table of Contents

Commissioning

5.5 First commissioning with the AOP30

You can select the motor standard and type

in the dialog screen.

The following is defined for the motor

0: Line frequency 50 Hz, motor data in kW

1: line frequency 60 Hz, motor data in hp

The following selection options are available

for the motor type:

1: Induction motor

2: Permanent-magnet synchronous motor

Other values are not permitted.

To navigate through the selection fields,

choose <F2> or <F3>.

To activate a selection, choose <F5>.

Entering motor data specified on the type

To navigate through the selection fields,

choose <F2> or <F3>.

To activate a selection, choose <F5>.

To change a parameter value, navigate to

the required selection field and activate with

The system displays another window in

which you can:

• Enter the value directly, or

• select the value from a list.

When you have finished entering the motor

data, choose "Continue" underneath the final

parameter value and activate with <F5>.

Operating Instructions, 03/2012, A5E03263466A

Converter cabinet units