Service Mode 1; Table 6-70: G 803, G 643, G 843, G 663, G 863 Program Sequence Chart - Miele G 600 Series Technical Information
(all us models)
Hide thumbs
Also See for G 600 Series:
- Installation instructions manual (40 pages) ,
- User manual (108 pages) ,
- Installation instructions manual (40 pages)
Table of Contents
Advertisement
G 600/G 800
6.8.13.2
Service Mode 1
1. To access Service Mode 1, close the door and turn the dishwasher on. All
program lights should light. If not, press the Start/Stop button to cancel the
program. Turn the dishwasher off.
2. Press and hold program buttons 1 and 2 while turning the dishwasher on.
Successful accessing of Service Mode 1 is indicated by a lit Drain light.
3. Place the see-through door onto the dishwasher.
4. Select a program and trip the door lock with a screwdriver or Miele tool C6042.
The selected program will start
5. Pressing program button 6 repeatedly will allow the technician to advance
through the program. If program button 6 is not pressed, the program steps are
carried out automatically, in their normal order.
Note:
The program chart in the wiring diagram should be used to follow the machine
functions when stepping through a program.
Note:
If not using the see-through door, access Service Mode 1 as above. Close the
dishwasher door. After the program starts, open the door and use program button 6
to select the appropriate program step. The program step that the dishwasher is
currently in will be displayed by the illuminated program button lights. Each light
corresponds to a binary number (see the program sequence chart, Table 6-70).
Add the numbers represented by the lights to arrive at the program step. When the
appropriate step has been reached, the door can be closed and the program will
continue.
Program button light 1
Binary number
Table 6-70: G 803, G 643, G 843, G 663, G 863 Program Sequence Chart
Example: Program button lights 2 and 5 are lit.
Program button light 2 = Binary code 16
Program button light 5 = Binary code 2
16 + 2 = Program step 18
Note:
The program chart in the wiring diagram should be used to follow the machine
functions when stepping through a program. As long as the dishwasher is in
Service Mode 1, the program buttons will indicate the program step in binary code.
6.8.13.2.1 Test Program
The test program is a program that allows the technician to check all of the major functions
of the dishwasher.
1. Access Service Mode 1.
2. Press program button 6. The test program will start and advance automatically.
3. Pressing program button 6 repeatedly will allow the technician to advance through the
program manually. If button 6 is not pressed, the program will run automatically.
Program Sequence Chart
2
3
32
16
8
Technical Information
4
5
6
4
2
1
127
Advertisement
Table of Contents
