Accessing Fault Codes; Deleting Stored Fault Codes; Operating Hours; Table 6-42: G 891 Service Mode 2 Functions - Miele G 600 Series Technical Information
(all us models)
Hide thumbs
Also See for G 600 Series:
- Installation instructions manual (40 pages) ,
- User manual (108 pages) ,
- Installation instructions manual (40 pages)
Table of Contents
Advertisement
Technical Information
Program button
Normal 130
Sani Wash
Normal 150
Light Wash
Pots & Pans
Economy
China/Crystal
Table 6-42: G 891 Service Mode 2 Functions
1
Factory setting
6.8.8.3.1
Accessing Fault Codes
1. Access Service Mode 2.
2. Press the Normal 130° program button.
3. The fault code will be shown in the display, e.g., F01, F02, etc.
4. Use the fault chart (Table 6-43) to determine which fault has been stored in the
dishwasher.
5. Turn the dishwasher off.
Fault code
F00
F01
F02
F03
F04
F05
F06
F07
F08
F09
3 dashes (---) in display
Table 6-43: G 891 Fault Code Chart
1
All wash programs can be run, but the heating element will not function during the cycle.
6.8.8.3.2
Deleting Stored Fault Codes
Access Programming Mode and press Start/Stop twice.
6.8.8.3.3
Operating Hours
1. Access Service Mode 2.
2. Press the appropriate program button indicated in Table 6-44 to display operating hours.
Program button
Sani Wash
Normal 150
Table 6-44: G 891 Operating Hours
Function
Fault codes
Operating hours
Operating hours
Flow meter
Increase temperature
Water softener
Increase water level
Fault
No error
NTC or NTC connections open-circuited
NTC or NTC connections short-circuited
Electronic failure, selector switch position not found
Heating failure - heating circuit opened or defective
electrical component in heating circuit
Water drainage failure, heater level switch
Too few pulses at flow meter / start of water intake
Too few pulses at flow meter / end of water intake
Water intake failure, heater level switch
Heater level switch not switching on at the end of
thermal stops
Indicates a F1, F2, F4, or F9 fault is stored in the
memory
Display
First 3 digits of total operating hours
Last 3 digits of total operating hours
110
Options
Display
-
F00, F01, etc.
-
e.g., 001
-
e.g., 127
195 to 205
195 to 205
150°F
50
160°F
51
1
With
60
Without
61
1
Standard
70
Increased
71
1
G 600/G 800
Advertisement
Table of Contents
